Talking about what aspects of machining will lead to steel deformation

In the development of mechanical processing, due to various mechanical processing deviations or other production and processing staff operating errors, it is easy to cause deformation of steel parts.

　　In the development of mechanical processing, due to various mechanical processing deviations or other production and processing staff operating errors, it is easy to cause deformation of steel parts. There is no way to deal with this problem. In the beginning, people clarified the actual reason of the deformation and then adopted release to solve it. The following is a brief introduction for you which aspects of machining will cause steel deformation.

　　In the development of mechanical processing, due to various mechanical processing deviations or other production and processing staff operating errors, it is easy to cause steel parts to deform. There is no way to deal with this problem. In the beginning, people clarified the actual reason of the deformation and then adopted release to solve it. The following is a brief introduction for you which aspects of machining will cause steel deformation.

　　The deformation caused by the clamping of steel parts

When the steel has a multi-directional clamping force effect, the order of the clamping force should be considered. The clamping force should be effective for making the steel piece touch the supporting point, and it is not easy to be large, and for the balanced cutting speed The key clamping force should be effective later.

　　Secondly, it is necessary to expand the total contact area of steel parts and fixtures or select radial clamping force. Increasing the rigidity of parts is a reasonable way to deal with the clamping deformation, but because of the appearance and structure of thick-walled parts, it has lower rigidity. That way, under the effect of clamping force, it will cause deformation.

　　The material and structure of steel parts will endanger the deformation of steel parts

　　The size of the deformation variable is proportional to the complexity of appearance, aspect ratio and wall thickness, and proportional to the stiffness and reliability of the material. Therefore, when designing plan parts, try to reduce the damage of this element to the deformation of steel parts.

　　Especially in the structure of large and medium-sized parts, reasonable configuration should be ensured. Before the production and processing, the strength and looseness of the blanks should be strictly controlled to ensure the quality of the blanks and reduce the deformation of the steel parts.

　　 As for what aspects of mechanical processing will cause the deformation of steel parts, the above has been explained very clearly, I hope it will be helpful to everyone. If you want to know other related knowledge, please pay attention to Wujiang Chenshi Machinery Manufacturing Co., Ltd. After more than ten years of unremitting efforts, the company has formed a total of more than 1,000 sections of machinery manufacturing, Suzhou mechanical processing (lathe processing, milling processing, grinder processing, machining center processing, micro-hole processing, etc.), micro-hole drilling machines, tube expanders, etc. Products.